Description
A larger 17mm head is common on certain aftermarket alloy wheels, and this box of ITP lug nuts in 10×1.25 flat base black finish with a 17mm head covers that combination for riders who need the bigger head size alongside a flat seating surface. Getting the head size right matters just as much as thread pitch, since a 14mm socket will not grip a 17mm head cleanly and can round it off under torque, especially with an impact gun.
- 10mm x 1.25 thread pitch with a flat base seat
- 17mm head size for wheels requiring the larger socket fit
- Black finish that blends with darker wheel and fender combinations
- Box of 16, sufficient for a complete set on most wheel patterns
- Flat seat geometry matched to non-tapered wheel pockets
- Even black plating across the full box for a matched wheel appearance
Confirm both your wheel’s seat style and your socket size before ordering, since a mismatch on either the flat seat or the 17mm head can lead to a wheel that never quite torques down right. Once verified, tighten in a star pattern for consistent clamping across the wheel. Recheck torque with the correct 17mm socket after the first ride, since new hardware tends to settle slightly once it sees real trail load. Keep the correct 17mm socket in your trail kit, since running the wrong size socket on this head is a common way to round it off fast.
