Description
Some wheel and hub combinations call for a 12mm stud with a 1.5 thread pitch rather than the 1.25 pitch found on many other applications, and this box of 16 ITP chrome lug nuts with a 60 degree tapered seat is cut to match that exact spec. Getting thread pitch right on larger diameter studs matters just as much as it does on smaller ones, since a nut that almost fits can still cross-thread and ruin a stud that is far more annoying to replace than a lug nut.
- 12mm x 1.5 thread pitch with a 60 degree tapered seat
- Box of 16, enough hardware for a full set across most wheel patterns
- Chrome finish for corrosion resistance and a clean finished look
- Tapered geometry that self-centers the wheel during final torque
- Correct pitch match reduces the risk of stud or nut thread damage
- Even chrome finish across all 16 nuts for a clean, matched appearance
Verify your hub studs are the 1.5 pitch variant before threading these on, since mixing them up with 1.25 pitch hardware is one of the most common lug nut ordering mistakes. With the right match confirmed, tighten in a star pattern to spec for even clamping load across the wheel. Recheck torque after the first ride following installation, since 1.5 pitch tapered hardware needs a brief settling period once it takes real load.
