All Balls Racing – Wheel Bearing & Seal Kits - Honda, including front kits for the 68-78 Z-50, the 1976 MR250, the 14-15 GROM 125 and the 96-99 CRM250AR, a rear kit for the 93-96 CRM50R, and front and rear kits for the 04-07 CBF500. Wheel bearings are a wear item with no warning light: they get loose slowly, and by the time you can rock the wheel by hand at the axle the seals have been letting water in for a while. Rough bearings drag on the brakes, put a slight wobble into the chassis under load and can chew a hub if they seize. These Honda wheel bearing kits include the bearings and the grease seals as a set, because installing new bearings behind old seals just restarts the clock. Sealed properly, the wheel spins free, the disc runs true against the pads, and steering feel stays sharp on small bikes and street bikes alike. Spin each wheel and check for play every time you have it off the ground. On small-wheel bikes especially, a dragging front wheel steals real roll-out, and you notice it the first ride after the swap. Tell us your year, model and wheel position and we will confirm the right kit before you order.