All Balls Racing – Chassis Bearings & Hardware - Honda, including float bowl gaskets for the 88-98 Honda VT600C Shadow, 04-06 CB600F (599) and 97-00 GL1500C, air cut off valve rebuild kits for the VT600C Shadow and 98-01 and 04-09 VT750C, plus clutch master and slave cylinder rebuild kits for the 85-96 VT1100C and 88-90 GL1500. This is the maintenance hardware that brings a carbureted Honda cruiser or standard back to life after years of sitting. Hardened float bowl gaskets seep fuel and let air into the bowl, which shows up as a fuel smell, stained cases and an engine that runs lean at cruise. A failed air cut off valve diaphragm is the usual cause of hard popping and backfiring on deceleration, and a rebuild kit fixes it without touching jetting. On the clutch side, new seals and cups in the master and slave cylinders restore firm lever feel and full disengagement so the box shifts clean instead of dragging. Doing the bowl gaskets and cut off valves together saves pulling the carbs a second time. These Honda rebuild kits are year and model specific, so tell us your bike and we will confirm the correct part before you order.